Our friendly expert advice line : 01666 822059

          Monday – Friday 7.30am - 5.00pm

Polybond Epoxy DPM Surface Membrane

  • Specially formulated to act as a Damp-Proof Membrane on porous cementitious sub-floors
  • Applied with a brush or roller at the rate of 8 square metres per litre
  • Supplied in 1 Litre containers
Categories: ,

Polybond Epoxy DPM Surface Membrane

Polybond Epoxy DPM is a two-part water based epoxy specially formulated to act as a Damp-Proof Membrane on porous cementitious sub-floors.

Once cured the tough film is completely waterproof and is unaffected by adhesives, bonding agents, levelling compounds and screeds.

After mixing, Epoxy DPM has a pot life of 1 hour at 10 oC, 45 minutes at 20 oC and less at higher temperatures.

It should be applied with a brush or roller at the rate of 8 square metres per litre.

Allow at least 6 hours to dry or when the first coat has dried sufficiently to walk on, then apply a second coat at 90 o to the first coat.

Supplied in 1 Litre containers sufficient for approximately 7 to 10 square metres depending on the substrate.

Please note this information is for guidance only. We do not sell this product which can be bought from builders’ merchants and tiling suppliers.