- For high-level mounting (minimum 3.5m)
- Many industrial / commercial applications
- To provide localised heating for energy efficiency
- Dust movement minimised
- Not affected by ventilation currents
- Can be surface mounted or suspended by rods or chains
Far-Infra Red High Output Radiant Panels
The Far-Infra Red range is designed to provide efficient thermal comfort in high-ceiling buildings such as commercial and industrial units, supermarkets, gymnasiums, showrooms and other such applications. They are specifically designed for high level mounting (minimum 3.5m or 11′ 6″) and can be suspended by drop rods or chains as well as being surface-mounted.
Their function is to provide localised heating – to warm the area required such as work stations.
Here the Far Infra-Red Panels are being used in a gallery. They are so versatile that they can be used in almost any high-ceiling interior environment to good effect.
Higher ventilation and air extraction rates do not significantly affect the radiant performance of these panels which will primarily warm the fabric of the heated area.
Radiant heating does not cause air convection currents and therefore dust movement is minimised and a clean, draft-free environment is the result.
These panels consist of a rod heating element housed within a specially designed aluminium extrusion profile. The surface area of the housing is treated with a silicating process which significantly increases its surface area and its ability to emit heat. The result is a high efficiency, low maintenance heater especially suitable for commercial and industrial environments.
Some suggested applications:
- Sports Halls
- Village Halls
- Exhibition Halls
- Farm Buildings
- School/University Buildings etc. etc.
Accessories include Tiltable Brackets and a protective grill for installations where the panel may be touchable.
These photos show Far Infra Red Radiant Panels installed at Trellech Village Hall, South Wales
Finished in powder coated casing (RAL9010 Off White) with grey radiating faceplate
Fully insulated galvanised casing with Class 0 foil backed 25mm thick insulation
Ceiling mounting fixings included with standard product. Tiltable brackets must be ordered separately.
Heating panel surface temperature – approximately 350 deg C – Protective Grill accessories must be ordered and fitted if the panels are capable of being touched.
Protection – Class1, IPX4; cable gland rated IP44
Recommended mounting heights – Full Heating 5 – 8m (16 – 26′); Localised Spot Heating 3.5 – 4.5m (11’6″ – 14′ 9″)
Models rated 600-1200W are rated 230/240V single phase. Models rated 1800-3600W are rated 230/400V three phase.
|3430||600W||650x250x60mm||Far Infra-Red High Output Heating Panel||5.8kg|
|3431||850W||650x250x60mm||Far Infra-Red High Output Heating Panel||5.8kg|
|3432||900W||1550x150x60mm||Far Infra-Red High Output Heating Panel||8.15kg|
|3433||1200W||1550x150x60mm||Far Infra-Red High Output Heating Panel||8.15kg|
|3434||1800W||1550x250x60mm||Far Infra-Red High Output Heating Panel||12.9kg|
|3435||2400W||1550x250x60mm||Far Infra-Red High Output Heating Panel||12.9kg|
|3436||3000W||1550x350x60mm||Far Infra-Red High Output Heating Panel||17.7kg|
|3437||3600W||1550x350x60mm||Far Infra-Red High Output Heating Panel||17.7kg|
|3438||Tiltable brackets suitable for all above models|
|3439||Protective Grill for use with 3432/3433|
|3440||Protective Grill for use with 3434/3435|
|3441||Protective Grill for use with 3436/3437|